No products found


No pages found

One of the factors that make nature so beautiful is the constant variation. You can't find two trees that are the same. Therefore, the appearance of the boards we use in our wood floors also varies.

Board Pattern


The surface layer of every 1-strip board is sawn from a single piece of wood. The natural appearance of the wood, including knots, colour variations and grain, is reflected in this. However, for some of our 1-strip floor collections, we have selected wood that offers little variation in colour and a minimum of knots. Kährs 1-strip flooring is available in several different lengths and widths.


The surface layer is two strips' wide. The strips are selected and arranged to give each 2-strip floor its own unique character. Kährs’ 2-strip flooring is available in two options: long strips, and short strips.


The surface layer of 3-strip flooring is created by placing three strips of wood of different lengths widthwise and at random. At Kährs, we produce 3-strip flooring configurations in a way that enhanceits lively expression, but we also create compositions that evoke a calmer feel.

Dutch pattern

Kährs Dutch pattern flooring is a classic floor that benefits from a modern construction. Kährs offers a wide variety of designs, from classical to modern.

Surface Treatment

Satin lacquer

Our satin lacquer complements the wood’s character by accentuating its natural structure. It also makes the floor more hardwearing and easier to clean. Meanwhile, our lacquer is one of the thinnest on the market and does not conceal the natural lustre of the wood.

Matt lacquer

The subtle finish of our matt lacquer produces a bare wood look, as it the floor was left untreated, or treated with oil. The soft, natural surface is pleasant to walk barefoot on. Matt lacquer is as hardwearing and easy to maintain as satin lacquer. A matt surface is coarser than a satin surface.

Ultra-matt lacquer

Wood treated with our ultra-matt lacquer feels and looks as if it was made from untreated, newly sawn timber, but has a strong, yet silky and invisible shield against wear and tear. The ultra-matt surface is coarser than a matt surface.


Kährs oil gives your floor a natural and beautiful look. Oil brings out the fine structure and grain of the wood and enhances its natural colour. Please note that floors should be oiled immediately after installation and then regularly maintained with Kährs Satin Oil.

High gloss lacquer

The high gloss lacquer gives your floor a shiny, polished look and provides a reflecting surface. It offers an exciting alternative to more conventional wood floors.

Refining Treatment


Brushing the surface highlights the natural structure of the grain and emphasizes the texture of the wood. Brushing effects vary, depending on the wood species. Brushes are made from different materials in varying degrees of hardness, and brushing is often carried out along with other refining treatments such as staining and bevelling of edges.


Staining further enhances the wood’s natural colour tones. It also allows us to apply new colours, thus completely transforming the appearance of the wood. Kährs offers a wide range of stained options – from the palest white, to rich charcoal shades.

Bevelled edges

A bevelled edge feature on a 1-strip floor gives a very distinct look. Kährs offers a number of floors with a bevelled edge finish in varying degrees, from “microbevelling” – tiny clarification and reinforcement of the edges created using sandpaper – to more prominent bevelling on both the long and the short sides, for a rustic, robust appearance.


By using different tools for manual wood scraping and sanding, we can give a new wood floor a worn appearance. A great amount of handwork goes into each floor to achieve its rustic character.


This special process alters the colour and shade of each plank. There are two grades of smoked finish: light and the darker fully smoked.

Saw marks

This involves the same process as hand scraping. However, the surface marks are created to resemble those made by a chainsaw.


Calm (City)

These floors are produced from our cleanest boards; i.e. from planks with a uniform appearance with small variations in grain, may contain small knots.

Variation (Town)

The floors with this grading are characterized by subtle variations in colour, tone and pattern, may contain small knots.

Lively (Country)

The Lively floors feature dramatic graining, gnarls and knots. They boast greater colour variations and have a more lively, rustic character.


These floors are made from boards with knots and cracks that give them a both lively and dramatic, yet warm character. They feature a variety of colour tones.


If you want your floor to make a really strong impression, choose an Expressive floor. These are made from boards with dramatic cracks and powerful knots and with a wide variety of colour tones.

Wood’s natural changes


The sapwood is almost white and the heartwood ranges from grey through light brown to light yellow with brown streaks. Ash undergoes a medium degree of change over time from a lighter freshly sanded tone to a straw/tan colour.


Beech ranges in colour from light cream to medium tan/brown with pink-orange overtones. It undergoes a medium degree of colour change with a slight muting of the orange colours and ambering over time.


Birch is usually straight-grained, with a fine, often wavy, structure. Birch undergoes a medium degree of change from freshly sanded cream to reddish yellow as it ages.


The sapwood is creamy white whilst the heartwood can vary from deep red to reddish brown, which together forms a fine figured, straight grain. Cherry undergoes an extreme degree of colour change with pronounced darkening to a dark reddish colour when fully aged. This process occurs within a few weeks in direct sunlight.

European maple

In comparison to Hard Maple, European Maple has a luster all of its own that gives the room a clean airy feel. It takes coloured stains easily, and is popular because of its wide area of application in interior and furniture design. Light in colour, European Maple turns golden over time.

Hard maple

The sapwood is cream-coloured, with a tendency to reddish brown, the heartwood varies from light to dark brown with red highlights. It undergoes a medium degree of colour change, from a creamy white to golden over time.


Jarrah has a smooth surface and straight graining. The sapwood and heartwood vary from salmon-pink to deep red. Finished floors often have a dark brown to reddish purple tone, which also deepens over the years.

Jatoba, Brazilian cherry

The sapwood can have broad figuring, light pink and sometimes greyish tones. The heartwood ranges from salmon pink to reddish brown with dark streaks. Over time Jatoba deepens in colour to a rich vibrant red.


The light brown to darker tone of White Oak undergo a medium degree of colour change with slight ambering over time.


The sapwood is creamy white but the heartwood is a light to dark chocolate brown, sometimes with a tendency to purple. The wood gains a special lustre over the years and undergoes a medium to high degree of colour change with the dark brown heartwood lightening over time to a more golden brown.

Hardness of wood species

Joint Systems

Woodloc® 5S

Woodloc® 5S makes installing a Kährs floor even faster and simpler. Woodloc® 5S is the latest innovative glue-free joint system, with a special locking tongue to create even stronger joints.

• The strongest joint on the market
• Faster and easier to install than Woodloc®
• Resistant to changes in temperature and humidity
• No gaps
• Covers 75 % larger installation areas without an expansion joint
• Floor can be used directly after installation
• Easy to remove the floor (when installed floating)
• Suitable for use with Kährs 13 mm, 15 mm and 30 mm floors


A mechanical joint with no need for glue.

• The world’s first mechanical joint – launched in 2000
• Faster and easier to install than traditional joints with glue
• Resistant to changes in temperature and humidity
• No gaps
• Floor can be used directly after installation
• Easy to remove the floor (when installed floating)
• Suitable for use with Kährs 7 mm, 10 mm, 15 mm and 30 mm floors

Tongue & Groove

This is a traditional tongue and groove construction. 

• Needs glue. Allow to dry before use following installation
• Suitable for Kährs 20 mm floors

For more detailed information regarding installation methods and sub-floor requirements, download the installation PDF for each product. Kährs Installation Instructions

Floor installaton checklist

• A floor can only be as good as the subfloor permits.
• To avoid moisture absorption, open the packages only when needed during installation.
• When installing, the temperature of the materials, subfloor and on site must be at least 18 °C.
• The relative humidity on site must be below 60%.
• The subfloor must be dry, clean, solid and sufficiently flat.
• Soft, elastic subfloors must be adjusted.
• Make sure that the correct vapour barrier is fitted.
• The foam plastic underlay (EPS) must have sufficient compressive strength.
• The foam plastic film must comply with applicable thickness tolerances.
• Put aside any damaged or faulty floorboards.