Our floors are durable and easy to keep clean. With proper maintenance, your wood floor will retain its beauty for years to come.
It’s also worth bearing in mind that light-stained and light-colored species of wood are more sensitive to wear-and-tear than dark ones, and therefore require more frequent cleaning and maintenance. For optimal care, ensure entrances are properly designed and have an area for wiping shoes. Below you will find an overview of maintenance requirements for domestic applications.
Maintenance Guide Domestic Areas
Maintenance Guide Commercial Areas
Maintenance and care of lacquered floors in commercial environments:
• Our factory-finished surface can be strengthened with a further coat of finish to improve moisture
resistance, but this is not necessary if use is similar to a domestic environment. However, note that an
additional layer of lacquer may change the appearance of the floor’s surface.
• Day-to-day cleaning should be carried out using dry methods. If using a combi-machine, use as little
water as possible. Any residual water should be dried within one minute.
• Do not allow the finish to become worn. This will avoid dirt and water penetrating the wood, ensuring
the floor will retain its easy-clean surface. Do not allow the lacquer to become worn.
• If the floor is very worn, or needs renovation for some other reason, it can be machine-sanded to bare
wood and have a new surface treatment applied.
For detailed instructions regarding maintenance and re-lacquering procedures, see our maintenance instructions.
Maintenance and care of Nature-oiled floors in commercial environments:
• The factory-oiled surface should be reinforced with Kährs Satin Oil directly after installation.
• Day-to-day cleaning should be based on dry methods such as vacuuming or sweeping, as use of water and cleaning agents increases the need for further maintenance.
• Wood floors require regular oil treatments. The frequency of treatments depends on its use and amount of foot traffic. Note that areas that are subject to greater wear than the rest of the floor can be partly treated.
• If simply renovating the surface treatment is insufficient, the wood floor can be machine-sanded down to clean wood, then re-oiled.
For detailed instructions regarding maintenance and re-oiling procedures, see our maintenance instructions.