Réf.art 710521
KÄHRS VERNIS SATINÉ MAT 1,0 L
Kährs Vernis Satiné mat 1 L
À base d'eau
79,81 €TTC
Les prix sont indiqués TTC
Trouver un revendeur
Visitez l’un de nos revendeurs pour voir nos sols en situation réelle
Fiche produit
| Packaging dimensions | |
| Largeur | 80 mm |
| Longueur | 80 mm |
| Volume | 1 l |
| Item Height | 260 mm |
| Faits | |
| Collection | Produits de réparation |
| Accessory Sub-type | Maintenance |
| Accessory type | Entretien |
| Traitement de surface | Vernis satiné |
| How to use | The surface to be finished must be carefully sanded and free of dust, dirt and other foreign materials. Depending on the level of wear on the old surface, this could be done either by screening or by sanding down the surface. The temperature of the floor should not be below 14°C nor exceed 28°C. Ideal is a 20°C floor temperature and a relative humidity of 55%. Shake the container before use, open and allow time for air to vaporize prior to application. Always test the finish on a smaller area to ensure colour and adhesion. Apply with roller, brush or applicator. 1. Screening: Recommended application: 1 coat, coverage 0,1 l/m2 2. Sanding down: Recommended application: 2-3 coats. Buff/screen the floors after first coat. Minimum recommended thickness for coverage is 0,25 l/m2, total amount. Drying time On bare floors: 30-60 minutes Succeeding coats: 2-4 hours Be very careful when using the surface during the first four weeks. |
| Ingrédients | Bonding agent: Polyurethane dispersion Viscosity: 28s (FC 4, 20°C) Solids by volume: 32% Approx. weight: 1,1 kg/l |