Kährs Luxury Tiles vinyl floors aren’t just beautiful and practical. They’re also easy and quick to install. Whether your new vinyl floor is laid using smart Click-joints or glue, you’ll find easy-to-follow instructions, preparations
and helpful tips along the way.
The temperature of both the room and floor materials must be between +18°C and +25°C. Make sure the floorboards have been stored within this temperature range for at least 24 hours before you begin laying your floor.
Kährs Luxury Tiles can be laid on top of most underlays. The underlay should be clean, dry, solid and flat. Remove all existing wall-to-wall carpeting or similar floor coverings. If the vinyl floor is to be laid on top of concrete, the relative humidity (RH) can be a maximum of 85% in the underlay. If you are using glue and laying your vinyl floor on top of underfloor heating, the heat must be turned off for the entire installation process and drying time.
Read more about preparations before installation below.
If you have experience laying flooring, here are a few fast tips for our vinyl floors.
Installation instructions for those who have bought a Kährs Luxury Tiles Click vinyl floor.
Installation instructions for those who have bought a Kährs Luxury Tiles Dry Back vinyl floor.
Short installation instructions for those who have bought a Kährs Luxury Tiles Herringbone vinyl floor.
Short Installation Instruction Click 6 mm
Short Installation Instruction Click 5 mm
Installation Instruction Dry Back Xpression
Adhesives approved for Dry Back installation